I love a good IKEA hack, I’ve seen so many sofa table hacks but I wanted a marble table in my living room soooo….. I made one, here is my IKEA hack for a marble table with gold trim. This is the most inexpensive way to create beautiful furniture. I love having things that are exactly the size color and finishes I want.
I started with some legs from Ikea They are 4$ each and come in a few colors, however gold was not one of them. I got out some Rustolum spray paint, and three coats later I had beautiful gold legs for my table. I also sprayed them with a coat of clear poly, just to make sure it didn’t chip or scratch too easily.
I had an old desk top i was going to use but it seemed too big. I had my cute hubby grab me a piece of MDF from the hardware store and had them cut it to size.
I’m so in love with the wood and marble that have been fussed together, and the accessories that are popping up at West Elm and Crate and Barrel are so cool!! I wanted to try for a similar look with my sofa table.
then i did a fun gold leaf strip next to the white paint. I’m always trying to glam things up a bit. Quick tip on the leafing, remember to wait about 15 for the glue to become tacky, if you are too impatient then the leafing wont stick because the glue under the leafing wont dry. I did tape off the painted part so i would get a crisp line but left the other side untapped because again it was going to get covered up.
Then the fun part add the contact paper. lay the wood table top on the wrong side of the contact paper and measure so that you have a good 3-5 inches over lap to the underside of the board. Turn the table over peel off the backing of the contact paper and place the contact paper onto the board, and smooth out bubbles with a credit card.
It really wasn’t hard to create a marble table and didn’t cost a lot, it just took a bit of time but I completed this in a few hours and I’m loving the result! If you want to watch the T.V. clip then click here to see my Studio5 fun with marble contact paper.